Deep Groove Ball Bearing

A deep groove ball bearing is one of the most popular types of bearing, and it is used in a wide range of applications. They can be found in everything from washing machines and dryers to dishwashers and computer fans. You may also see them in toys like fidget spinners. These bearings are very versatile and don't require constant lubrication, though using an appropriate lubricant can help them last longer. They are also easy to replace, making them a common home appliance component.

Deep groove ball bearings have an inner ring that is much deeper than other types. They also have one shoulder on the outer ring, allowing them to be disassembled for maintenance. These bearings are great for axial and radial loads, making them an excellent choice for applications where the pressure is located along the shaft.

A deep groove ball bearing is designed to withstand a high radial load. They are able to withstand a load of 500 N while still retaining a low friction surface. They are also suitable for high-temperature applications. Another useful feature of a deep groove ball bearing is its sensor-bearing unit. This simple device can detect if the ball bearing is slipping or not. Sensor-bearing units can also help with steering and angular position measurement.

Deep groove ball bearings are available in both sealed and open designs. It is important to choose the correct type for your application. Deep groove ball bearings with a seal are a good choice for applications where anti-corrosion is essential. To find out more about corrosion-resistant bearings, check out Schaeffler's Technical Product Information TPI 64.

Deep groove ball bearings are used in a wide range of applications. For example, medical equipment uses deep groove ball bearings for many different purposes. You can save a lot of money by refurbishing them and reducing the cost of replacement parts. You may also find that your existing bearings are still perfectly good and even better than new ones.

Radial deep groove ball bearings transfer loads from rotating parts to housings with the least amount of friction. Depending on their series, they are rated for a certain axial and radial load carrying capacity. The smaller the axial load carrying capacity, the smaller the bearing's cross-section will need to be.

Deep groove ball bearings are sealed on both sides and lubricated with lithium soap grease, which has mineral oil as its base and good anti-corrosion properties. The filling level is measured so that the grease is sufficient for the life of the bearing. As a result, deep groove ball bearings are usually maintenance-free.

Single-row deep groove ball bearings are the most widely used bearings in the world. They are versatile and reliable, and are cheap to produce and maintain. One of the major manufacturers of these bearings is Schaeffler. The company manufactures several subtypes of single-row deep groove ball bearings, including Generation C bearings that offer reduced noise levels.